Sc569-00 Ricoh ~repack~ -

: If the error persists after clearing paper, a technician often needs to reset the code in Service Mode (SP Mode) using command If the error returns immediately after a reset, the Fusing Pressure Release Motor or its associated HP (Home Position) Sensor likely needs to be replaced by a service professional. Are you seeing this error after a specific type of paper jam , or does it happen every time you turn the machine on?

: A frequent cause is a paper jam that has occurred within the fuser or paper exit area. If paper is stuck, it can physically block the pressure release mechanism from moving to its home position. Paper Weight/Type sc569-00 ricoh

This public link is valid for 7 days and shares a thread, including any personal information you added. This link or copies made by others cannot be deleted. If you share with third parties, their policies apply. Can’t copy the link right now. Try again later. : If the error persists after clearing paper,

While this won’t fix the hardware, it can confirm if the issue is intermittent. If paper is stuck, it can physically block

Thoroughly inspect the and the lower pressure roller for visible tears, deep grooves, or wrapped scraps of paper. Spin the gears manually to see if they rotate smoothly or feel jammed. Step 2: Clean the Sensors and Actuators

(typically 20lb/75gsm) while troubleshooting to rule out media-related stress on the motor. Service Mode Reset