Download the correct firmware file for your specific AT-163 revision.
: Disconnect the power cable for 5 minutes. If it still fails to boot, the internal flash memory is corrupted, and the device will need to be replaced. Post-Update Setup viewtv at-163 firmware update
Prevent the device from freezing during channel surfing. Step-by-Step Update Guide 1. Preparation: The Right Gear USB Drive: Use a 4GB to 32GB USB 2.0 or 3.0 flash drive. Download the correct firmware file for your specific
Before attempting any update, you must verify your specific model's compatibility. Installing the wrong firmware version can permanently brick the device. Post-Update Setup Prevent the device from freezing during
Insert the prepared USB flash drive into the USB port located on the front panel of the AT-163. Press the button on your ViewTV remote control. Navigate to the System or Option menu using the arrow keys. Select Software Update (sometimes listed as USB Upgrade ).
Ensure the drive is formatted to FAT32, not NTFS or exFAT. Also, try a drive with a smaller capacity (under 16GB), as older converter boxes sometimes struggle with high-capacity USB 3.0 drives. "No Upgrade File Found"
This occurs if the wrong firmware version was flashed. Unplug the power cable for 10 minutes. If it fails to boot after plugging it back in, the internal flash memory is corrupted, and the hardware must be replaced. Share public link