Manual - Gmr-32b Phase Controller

The GMR-32B Phase Controller is an industrial device used to control AC power by adjusting the phase angle of the input waveform. It’s typically used for reactive load control, motor soft-starting, heater power regulation, and other applications requiring smooth voltage control.

Disconnect all power sources before attempting installation. Ensure proper grounding to prevent electrical shock. Do not exceed the rated current and voltage limits. Install in a well-ventilated, dust-free environment. gmr-32b phase controller manual

The GMR-32B utilizes advanced microprocessor-controlled phase-angle firing to regulate AC power. By precisely clipping the AC waveform, it delivers smooth, infinitely variable power to resistive and inductive loads. Key Specifications 110V – 480V AC (Self-sensing, 50/60 Hz) The GMR-32B Phase Controller is an industrial device

: If your specific sub-variant includes adjustable dials or front-panel DIP switches, set your upper and lower voltage limits according to your plant specs. For standard fixed 380VAC models, the inner micro-control parameters are preset at the factory. Ensure proper grounding to prevent electrical shock

| Signal Type | Connection | |-------------|-------------| | 4-20 mA | C1 (+24V loop), C2 (signal), GND | | 0-10V DC | C1 (+10V), C2 (input), GND | | Potentiometer (10kΩ) | C1 (wiper), C2 (CW), GND (CCW) |

Do not install this unit on the output side of a variable frequency drive (VFD); it must be sampled from the main power supply side.

The GMR-32B phase controller is a device designed to control the phase of a RF signal. It's commonly used in various applications, including: