Test resistance across pins 1 and 2 of the iron handle (ceramic heater should read ~12-15 ohms). Shorted TRIAC on the pump control line.
The hot air gun heating element can reach temperatures exceeding 450°C. Ensure the handpieces are completely cool to the touch before attempting disassembly. Gordak 952 Service Manual
Never leave the soldering iron idling at high temperatures ($>$400°C) for extended periods; this rapidly oxidizes the tip plating. Clean with brass wire sponge meshes and re-tin the tip surface prior to powering down. Test resistance across pins 1 and 2 of
The Gordak 952 is a staple in the electronics repair community. Known as a budget-friendly 2-in-1 hot air rework station and soldering iron, it is widely cloned and sold under various names (Yihua 952, Atten, etc.). However, like any precision tool, it is prone to failure—heating element burnout, fan control issues, or triac shorts. Ensure the handpieces are completely cool to the