Attach the metal ground braces to the bottom pole using the long hex bolts and washers.
Your first task is to get the base ready. Flip the base upside down. You'll find designated slots to install the two wheels. Insert the axle through one wheel, then through the pole mounting bracket within the base, and finally through the second wheel. Secure the axle according to your manual's instructions. This wheel system is what makes the CB14500 truly portable, allowing you to roll the hoop into position once it's assembled. lifetime basketball hoop assembly cb14500
If your model includes a breakaway rim, slide the compression springs over the bolts on the backside and tighten the locknuts until the springs are compressed to the manufacturer's specified measurement. Phase 5: Raising the Pole and Securing to the Base Attach the metal ground braces to the bottom
The bottom pole has slots near the bottom for the axle. The middle pole is plain on both ends. The top pole has bracket mounting holes near the top. You'll find designated slots to install the two wheels
Before you dig, inventory your parts. This model typically includes:
Insert the wheel axle through the designated slots in the plastic base. Slide the wheels onto the axle and secure them according to the manual's diagram.
