Schematic Nintendo Switch Oled New! -

When docked, the MIPI DSI signal is ignored, and the SoC outputs a DisplayPort signal. This signal routes to a dedicated transmitter chip ( PI3USB30532 or similar multiplexer matrix), which splits the signal into HDMI differential pairs forwarded to the Type-C port.

The Tegra X1+ outputs video signals via a bus. Schematic Nintendo Switch Oled

Measure the capacitors surrounding the chip. If the capacitors on pins 5, 6, or 40 read 0 Ohms to ground, the M92T36 is shorted and must be replaced via hot-air micro-soldering. Conclusion When docked, the MIPI DSI signal is ignored,

This public link is valid for 7 days and shares a thread, including any personal information you added. This link or copies made by others cannot be deleted. If you share with third parties, their policies apply. Can’t copy the link right now. Try again later. Measure the capacitors surrounding the chip

The Tegra SoC outputs video via a high-speed MIPI DSI (Mobile Industry Processor Interface Display Serial Interface) bus. The schematic shows multiple differential data pairs plus a clock line running directly from the SoC through EMI filters to the high-density display FPC (Flexible Printed Circuit) connector. OLED Voltage Generation (Positive/Negative Rails)