Adjust the feet (on adjustable models) or use metal shims under the cast iron base until the bubble is perfectly centered. 3. How to Read and Operate the Avery Berkel L115
| Error Code | Meaning | Suggested Fix | | :--- | :--- | :--- | | | RAM failure / corrupted configuration due to depleted internal batteries | Replace internal batteries, then re‑enter setup mode to clear the error and reconfigure scale parameters | | 104 | Calibration data mismatch (often caused by incorrect over‑capacity setting) | Re‑run the calibration procedure, ensuring the 10% over‑capacity step is correctly entered | | 201 | General configuration error | Re‑enter setup mode and verify all parameters are set correctly | | 206 | Load cell signal error | Check all load cell wiring connections; correct pinout is essential | | 213 | Communication error | Verify RS‑232 connections if printer or PC is connected | | 997 | Unknown error code reported by some users | Re‑enter setup and verify all configurations | Avery Berkel L115 Manual