!full! - Miaa715 C Link

[Host System / PC] ---> (MT-LINK-CAB / Serial Interface) ---> [MIAA715 Device Controller] | [Firmware Update / C-Link State] Hardware Interfacing & Maintenance

Use the specified termination resistor (120 ohms, 1% metal film) at the physical end of the C Link chain if the topology is a line (daisy chain). For a star topology, no termination is needed. miaa715 c link

: Networks like CC-Link (Control & Communication Link) utilize master stations and remote I/O blocks. Alphanumeric tags are assigned to these modules to route digital packets and signals through factory floors. [Host System / PC] ---> (MT-LINK-CAB / Serial

| Parameter | Typical Value / Feature | | :--- | :--- | | | Shielded twisted pair (STP) or fiber-optic hybrid | | Connector Type | M12 X-coded or 9-pin D-sub (with C-keying) | | Maximum Cable Length | 100 meters (copper); up to 2 km (fiber option) | | Data Rate | 100 Mbps (full-duplex) | | Protocol | EtherCAT-based or proprietary deterministic MAC | | Operating Voltage | 24V DC (±20%) | | Current Draw | 250 mA (typical, without powered peripherals) | | Protection Class | IP67 (when mated with appropriate hoods) | | Temperature Range | -20°C to +70°C | Alphanumeric tags are assigned to these modules to