Locate the 3-pin jumper labeled or JBAT1 (usually found near the round CR2032 coin-cell battery).
Understanding the physical geography of the board prevents installation errors. Below is the standard component map for the ML194V-0 platform: FOXCONN ML194V-0 MOTHERBOARD MANUAL
Move the plastic jumper cap from pins 1-2 (Normal mode) to pins 2-3 (Clear mode). Wait 15 seconds, then return the jumper cap to pins 1-2. Reconnect power and boot the system. No Display / Continuous Beeping Locate the 3-pin jumper labeled or JBAT1 (usually
If the specs above aren't enough and you need the official schematic, you have to search smarter, not harder. you have to search smarter